We67k1-Cnc Multi-Machine Tadem Hydraulic Press Brake (bending Machine)

WE67K1-CNC MULTI-MACHINE TADEM HYDRAULIC PRESS BRAKE (BENDING MACHINE),hydraulic brake

Product DescriptionThis model of hydraulic press brake(hydraulic bending machine) has following performance:

model: series 2-WE67K1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress. 2 Synchronization working principal of both machines: Adopting electric-hydraulic proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to C plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision. 3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user. 4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job. 5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.

8. Full machine is guarded with safety guard with interlocker to prevent the operator from injured.

CNC control system: Computer: DELEM CNC system and its performance A. LCD displayer. B. Tool Basement and Program basement C. The synchronization precision of Y1-Y2 could reach 0.01mm and the precision of backgauge is 0.01.

OPTIONAL:1 two-hand control foot pedestal device2.it is possible for special tooling with different lengths to bend the closed frame workpiece3.automatic crowned compensation device in worktable is available4.photo-electricity protection(light sensor) is possible5. Multi-control axis can be requested6.any tailor-made are available on request.....

model	Nominal pressure	Length	Distance between housings	Throat depth	Stroke	Strokes	Max.	Main motor	Weight	Overall
	(KN)	of table	(mm)	(mm)	of ram	of ram	open height	(kw)	(kg)	dimensions
		(mm)			(mm)	(mm)	(mm)
WE67K-63/2500	630	2500	2050	250	100	≥10	350	7.5	5500	2780x1725x2480
WE67K-80/2500	800	2500	2650	320	200	≥8	460	7.5	6200	2770x1955x2480
WE67K-100/3200	1000	3200	2650	320	200	≥8	475	7.5	8700	3450x1955x2485
WE67K-125/3200	1250	3200	2650	320	200	≥8	475	7.5	9000	3450x1955x2485
WE67K-160/3200	1600	3200	2650	320	200	≥6	540	11	11000	3450x1600x2855
WE67K-200/3200	2000	3200	2650	400	200	≥3	560	11	16000	3450x1950x2685
WE67K-250/3200	2500	3200	2650	400	250	≥3	560	15	17000	3450x2030x3000
WE67K-250/4000	2500	4000	3100	400	250	≥3	560	15	19000	4300x2030x3000
WE67K-300/4000	3000	4000	3100	400	250	≥3	560	22	20000	4300x2030x3200
WE67K-300/6000	3000	6000	4800	400	250	≥3	560	22	28500	6100x2560x4560
WE67K-400/4000	4000	4000	3100	500	320	≥2.5	700	30	23000	4100x3280x3450
WE67K-400/6000	4000	6000	4800	500	320	≥2.5	700	30	42000	6150x3280x5300
WE67K-500/6000	5000	6000	4800	500	300	≥2.5	700	37	54000	6150x3777x5350
WE67K-500/7000	5000	7000	5600	800	320	≥2.5	700	37	68000	7150x4140x9570
WE67K-600/6000	6000	6000	4800	600	320	≥2.5	800	45	62000	6211x5959x5500
WE67K-800/6000	8000	6000	4800	800	350	≥2	800	55	80000	6000x6915x6100
WE67K-800/7000	8000	7000	5600	500	350	≥2	710	45	85000	7200x4100x4900
WE67K-1000/6000	10000	6000	4800	500	450	≥1.5	800	50	139000	6300x4400x5800
WE67K-1000/8000	10000	8000	5600	500	450	≥6	800	50	150000	8300x4400x5800

We67k1-Cnc Multi-Machine Tadem Hydraulic Press Brake (bending Machine).hydraulic brake/.......

We67k1-Cnc Multi-Machine Tadem Hydraulic Press Brake (bending Machine)